Cavity Wall Insulation FAQ’s

What are the benefits of cavity wall insulation?

Around a third of all the heat lost in an un-insulated home is lost through the walls. Cavity wall insulation is one of the best ways to reduce the amount of energy you need to heat your home. It could save you around £115* a year on your fuel bills.

It also lowers the carbon emissions from your home by around 610kgs* and improves the energy rating on an Energy Performance Certificate.

What is cavity wall insulation?

Cavity wall insulation consists of granulate glass wool fibres, treated with an inert water repellent and milled down in order for it to be blown into the cavity wall, therefore, creating a quilt-like effect around your home.

The products we use are made in the UK and contain a high percentage of recycled glass. They are also free from any material with ozone depletion potential.

How will the cavity wall insulation be installed?

Our technicians will arrive at your home and perform a pre-installation check. Remember to ask them for their identification cards.

The installation process is essentially in two parts. Firstly, the technician will drill holes in the mortar in-between the bricks of your home, at specific points around each elevation. These holes will be of 22mm to 25mm in diameter.

The insulation will then be injected into the holes from the outside (via the machine in the van) taking between two to three hours (for a three bedroom semi detached house).

Do I have to do anything before the installation?

The drilling process does create some vibration - so it would be wise to remove ornaments, particularly on external walls, for safety and peace of mind.

The technician will need to gain access to all walls, so he will need to get inside attached garages, lean-to-sheds, conservatories etc. If you have a wall right on a boundary, you may like to mention to your neighbour that the technician will need to go onto their property.

Does the technician have to come into the house?

The technician must undertake checks before and after installation, including any heating appliances, so it is essential that they have access inside the property.

Is there much mess?

The drilling process inevitably creates a little dust. The technician will go around the outside of your home at the end of the installation and clean up. It is important to note however, the conditions and nature of our weather can at times hamper even the most determined attempts. Please, take the time to speak with our staff and be sure that you are happy with the finished product. We also believe it wise to remove vehicles from the drive and items close to the walls. In return this will give the technician better access for equipment and tools.

How do I know the walls are full?

This system of cavity wall insulation has a defined pattern of holes, which has been tested by the British Board of Agrément to verify that it results in a complete fill.

Also, during your survey, we took measurements of your home including a depth gauge and inspection of the cavity to be filled. From these measurements we know the amount of material required to correctly fill your walls.

The technician will, therefore, check and record this data and match this against the quantity of insulation used. Our internal office staff operates a 100% check of this data and measure your results before we issue your 25 year guarantee.

It is possible that you may also be randomly selected in our on-site technical monitoring.

What about the ventilators that are in the external wall?

Ventilators supplying combustion air to fuel burning appliances must be safeguarded. Similarly ventilators at ground level that ventilate below timber floors must be safeguarded. The technician will investigate them to check they are already sleeved, If they are not, the technician will remove them and seal around them to stop them being blocked by the insulation. Other vents, which may be redundant, such as cavity vents or vents that are in bedrooms may be closed off. The technician should discuss these with you, so if you have any questions please ask. Redundant airbricks may be filled.

When will I receive the guarantee?

The guarantee you will receive is called a "CIGA" (Cavity Insulation Guarantee Agency) which guarantees workmanship and materials for 25 years. We will apply for it on your behalf and it will be sent to you direct from CIGA. It can take up to 8 weeks for this to be delivered to you after installation.

Will my house be warmer?

Insulation dramatically reduces heat loss through the insulated wall therefore you will be able to achieve the same temperature in

your home by turning your thermostat down by a little. Your property should still achieve the desired warmth because the house will retain its temperature for longer.

It can also be noted that during the summer the insulated cavity will prevent some of the suns heat from entering the walls, therefore, keeping your home cooler

* Sources the Energy Saving Trust accurate as of Jan 2010